1 Chapter overview
Most radionuclides do not decay straight to a stable atom. They decay in chains — a parent A feeds a daughter B, which feeds C, and so on. The question that runs through this whole chapter is a simple one: after some time, what is the relation between the activity of the parent and the activity of the daughter?
The answer is the theory of radioactive equilibrium. When the daughter is made as fast as it decays away, the parent–daughter activity ratio locks to a constant value — and that constant tells you which of three regimes you are in: secular, transient, or no equilibrium. The ⁹⁹Mo/⁹⁹ᵐTc medical generator sitting in every nuclear-medicine department is a transient-equilibrium system; the ²³⁸U/²³⁴Th pair in an old uranium ore is a secular one.
The same mathematics — production competing with decay — governs what happens when you make a radioisotope in a reactor instead of inheriting it from a parent. That growth-and-decay balance gives the saturation activity, which is the working heart of neutron activation analysis (NAA), the most sensitive elemental-analysis technique in the analytical chemist's kit.
Chapter 2 supplies 14 PYQs (2020–2023), and the setters love a few derivations to the point of repetition: saturation activity + half-saturation proof (asked 3×), the ⁹⁹Mo → ⁹⁹ᵐTc maximum-daughter-activity numerical (2×), and the transient-equilibrium time-shift proof (2×). If you can derive the Bateman solution for a two-member chain from scratch, every question in this chapter becomes a special case of it.
What this chapter covers
- §2 Concepts — what equilibrium means physically, and the three regimes.
- §3 Derivations — the Bateman equation (2-member and n-member), secular and transient limits, the time of maximum daughter activity, equal-decay-constant special cases, and the growth-and-decay equation of activation analysis.
- §4–8 — fully worked numericals, figures, all 14 PYQs with step-by-step solutions, exam Q&A, and a one-screen revision sheet.
2 Core concepts
2.1 · Successive disintegration
A successive disintegration (radioactive series) is written , where and are the decay constants of parent and daughter. At any instant:
- parent atoms decay: , so ;
- daughter atoms are created by the parent's decay and destroyed by their own: .
Activity is the disintegration rate (decays per second). Exam questions ask about activities, not atom counts — keep the two distinct. , .
2.2 · What "equilibrium" actually means
Radioactive equilibrium does not mean the two activities are equal. It means the ratio of daughter activity to parent activity becomes constant in time:
Once equilibrium is reached, the daughter decays with the parent's apparent half-life — plotting against time gives a straight line of slope . Equilibrium is never instantaneous: the daughter needs roughly 6–7 of its own half-lives to build up to its equilibrium value, because the approach goes as after daughter half-lives ( gives 99.2%).
2.3 · The three regimes
Everything depends on the relative sizes of and — i.e. on the relative half-lives.
The parent is enormously long-lived (uranium, thorium, radium series). The parent's activity is effectively constant, and the daughter's activity rises to equal it:
Example: ²³⁸U ( y) → ²³⁴Th ( d). In an undisturbed old ore, every member of the chain has the same activity as the ²³⁸U parent.
The parent is longer-lived but not that much longer (roughly, half-lives within a factor of ~100). The daughter activity rises, overshoots the parent, and then the two decay together with a fixed ratio greater than 1:
Example: ⁹⁹Mo (66 h) → ⁹⁹ᵐTc (6 h), the workhorse medical generator. The equilibrium ratio here is : at equilibrium the ⁹⁹ᵐTc activity sits 10% above the ⁹⁹Mo activity.
The parent decays faster than the daughter. The daughter activity rises to a maximum and then decays away with its own (longer) half-life. The parent eventually vanishes and the daughter is left alone.
Example: ²¹⁰Pb (22.3 y) → ²¹⁰Bi (5.0 d) → ²¹⁰Po (138 d): between ²¹⁰Bi and ²¹0Po there is no equilibrium — the polonium outlives its bismuth parent.
Students write "at equilibrium " for every case. That is true only for secular equilibrium (and, instantaneously, at the daughter's activity maximum). For transient equilibrium the ratio is the fixed number — in the ⁹⁹Mo/⁹⁹ᵐTc generator it is 1.10, not 1.
2.4 · The three cases at a glance
| Regime | Condition | Equilibrium ratio | Daughter curve | Classic example |
|---|---|---|---|---|
| Secular | rises to the parent's level, then flat | ²³⁸U → ²³⁴Th | ||
| Transient | overshoots parent, then runs parallel above it | ⁹⁹Mo → ⁹⁹ᵐTc | ||
| No equilibrium | no constant ratio | peaks at , then decays alone | ²¹⁰Bi → ²¹⁰Po |
2.5 · Activation analysis — the idea in one page
Principle. Irradiate the sample with neutrons (usually in a reactor). A tiny fraction of the target nuclei undergo capture and become radioactive; the induced activity is proportional to the amount of the element present. Measure the characteristic γ-rays (or β-counts) of the product and compare with a standard irradiated under identical conditions — this is the comparator (relative) method, which cancels out flux, cross section and geometry:
Here , are the decay (cooling) times between end-of-irradiation and counting; the exponential corrects for the different decay each has suffered. Because the standard and sample are irradiated simultaneously, , , and the saturation factor all cancel.
Why it is so sensitive. From (14), the saturation activity per target atom is — a high reactor flux keeps making product atoms faster than they decay, so even trace (ppm–ppb) amounts give countable activity. NAA is essentially non-destructive and blank-free (no reagents are added before irradiation).
INAA — Instrumental NAA: irradiate, then count the sample directly (no chemistry). RNAA — Radiochemical NAA: a chemical separation after irradiation removes interferences before counting. FNAA — Fast NAA: uses fast neutrons (e.g. 14 MeV from a D–T generator) instead of thermal ones. CPAA — Charged Particle Activation Analysis: uses protons, deuterons or α-particles instead of neutrons — the complement of NAA for light elements, where neutron cross sections are poor.
"CPAA and NAA are complementary to each other" (2022): NAA is weak for light elements (H, He, Li, Be have tiny thermal-neutron cross sections; C, N, O give inconvenient products), while charged-particle reactions such as ¹²C(d,n)¹³N or ¹⁶O(p,α)¹³N determine exactly those elements. CPAA is also surface-sensitive (charged particles stop quickly), whereas NAA probes the bulk — together they cover the whole periodic table and the whole sample depth.
3 Key derivations
Every result in this chapter flows from one differential equation. Learn this derivation cold — the PYQ setters keep asking its consequences.
D1 · The two-member Bateman equation
Parent A decays with ; daughter B is fed by A and decays with . With and :
This is linear first-order. Multiply by the integrating factor :
Integrate from 0 to (with ) and divide by :
Multiplying by and writing gives the activity form — the version you will actually use in numericals:
D2 · The general Bateman equation (n-member chain)
For a chain with only member 1 present at , repeated use of the integrating factor gives the closed form:
You will not be asked to derive (6), but you must recognise it: it is the formula behind the three-member PYQ (D6 below) and behind every "activity of the nth member" question.
D3 · Secular equilibrium as a limit of Bateman
Put into (4). Then and the parent barely decays ():
Multiply by : the daughter's activity is
The daughter grows toward the parent's activity with its own decay constant governing the approach — after about 7 daughter half-lives the two activities are equal to better than 1%.
D4 · Transient equilibrium as a limit of Bateman
Now but not negligibly so. For large compared with the daughter's half-life, and (5) gives:
Both activities then decay with — the daughter has adopted the parent's apparent half-life. For ⁹⁹Mo/⁹⁹ᵐTc this constant is .
D5 · Time of maximum daughter activity
Set in (5). Since , this is , i.e. formation rate = decay rate:
Differentiating the bracket in (5): , so :
At the two activities cross — the only instant (outside secular equilibrium) at which exactly. For ⁹⁹Mo/⁹⁹ᵐTc: h (worked in §4).
D6 · Special case: equal decay constants
When , (4) is 0/0 — take the limit (or solve directly):
The daughter peaks at with .
Three-member equal-λ chain (2023 PYQ). For with , , solve with from (10) using the integrating factor :
Check: at the bracket is , so , as required.
D7 · Formation of a radioelement in a nuclear reaction (activation growth-and-decay)
Irradiate target atoms in a neutron flux (n·cm⁻²·s⁻¹); the reaction cross section is (cm²). Product atoms are made at the constant rate and decay with :
Same integrating-factor trick as D1, with :
The activity at the end of an irradiation of duration is therefore
Letting , the exponential dies and the activity saturates — production exactly balances decay:
Half-saturation proof (asked 3×). Set in (13): , so , , and
Useful corollaries: 75% of saturation after , 99% after — beyond ~7 half-lives there is nothing to gain by longer irradiation. After irradiation stops, the made activity simply decays during the cooling/counting delay: .
4 Worked examples
E1. A 1.0 g sample of pure ²³⁸U ( y) is left undisturbed for a very long time. What is the equilibrium activity of the daughter ²³⁴Th ( d), and what mass of ²³⁴Th is present?
, so secular equilibrium applies: at equilibrium .
Hence kBq. The number of thorium atoms follows from :
Answer: 12.4 kBq of ²³⁴Th — just 14.5 pg of it. That is the power of secular equilibrium: an immeasurably small mass carrying a very measurable activity.
E2. A ⁹⁹Mo/⁹⁹ᵐTc generator is freshly eluted (no ⁹⁹ᵐTc) and the initial ⁹⁹Mo activity is 4.0 mCi. Given h and h, find (a) the time of maximum ⁹⁹ᵐTc activity, (b) the ⁹⁹ᵐTc activity at that time.
(a) From (9):
(b) At the activities are equal (D5), so evaluate the parent:
(Check with the full Bateman form (5): mCi. ✓)
Answer: (a) 22.8 h, (b) 3.15 mCi. Note the equilibrium ratio — the technetium sits 10% above its parent, the signature of transient equilibrium.
E3. 1.0 g of ⁵⁹Co (100% abundant, b for the (n,γ) reaction) is irradiated in a flux n·cm⁻²·s⁻¹. (a) What is the saturation activity of the ⁶⁰Co formed ( y)? (b) What activity is actually obtained after 1.0 y of irradiation? (c) How long must one irradiate to reach 75% of saturation?
(a)
(b)
(c) y.
Answer: (a) 10.2 mCi, (b) 1.26 mCi, (c) 10.5 y. A 5-year-half-life product simply cannot be made to saturation in a reasonable time — the 1-year irradiation only reaches 12%.
E4. In the chain both members have min and Bq. Find the maximum activity of B and when it occurs.
Use the equal-λ result (10): . gives :
Answer: 368 Bq at 14.4 min — the daughter can never exceed % of the initial parent activity when the decay constants are equal.
E5. A pure ²¹⁰Bi source ( d) of activity 1.0 MBq decays to ²¹⁰Po ( d). At what time does the ²¹⁰Po activity reach its maximum, and what is it?
: no equilibrium — the polonium peaks and then decays alone. Using (9):
At , (D5):
Answer: 24.8 d; 31.9 kBq. After the bismuth has vanished, the polonium simply decays with its own 138-day half-life.
5 Figures
6 PYQ bank
Every question below appeared verbatim (modulo notation) in a Burdwan University M.Sc. paper, 2020–2023. Repeat offenders carry a count badge — revise those derivations until you can write them blind.
Q. Consider the transient equilibrium . If the activity of A at time equals the activity of B at time , after equilibrium is reached, show that as .
After equilibrium is reached, is large compared with the daughter's half-life, so is negligible in the Bateman activity (5):
Setting and cancelling :
Now let . Write and use :
Physical meaning: in the near-secular limit the daughter lags the parent by one daughter mean life — the B-atoms you count at time were, on average, born one mean life earlier.
Q. Write down the principle of neutron activation analysis. A standard containing 10.5 μg of Al and an unknown sample weighing 240.0 mg were irradiated simultaneously in a reactor. The standard was counted 5.0 min after the end of irradiation with a ²⁸Al counting rate of 5.37 × 10³ cpm; the sample was counted 10.0 min after the end of irradiation with 1.37 × 10³ cpm. Calculate the Al content of the sample in μg/g. [ of ²⁸Al = 2.25 min.]
Principle: neutrons convert a fraction of the target nuclei into a radioactive product; the induced activity is proportional to the mass of the element present. A standard of known mass irradiated simultaneously with the sample lets flux, cross section and irradiation history cancel (comparator method, (16)).
At end-of-irradiation the activities are in the ratio of the Al masses, ; each then decays for its own cooling time:
Answer: 52.1 μg/g (≈ 52 ppm). Note the sample was counted later, so its raw count rate must be corrected up by — the classic slip is to correct in the wrong direction.
Q. Determine the time for the maximum activity of the daughter in the decay ⁹⁹Mo —66 h→ ⁹⁹ᵐTc —6 h→ ⁹⁹Tc. Hence find the activity of the daughter (⁹⁹ᵐTc) at that time, if the initial parent activity (⁹⁹Mo) was 4.0 mCi.
From (9):
At , (D5):
Answer: 22.8 h; 3.15 mCi. (Same working as Example E2, §4.)
Q. (a) Deduce the expression for the saturation activity in neutron activation analysis, considering the produced activity (symbols of usual meanings). Prove that the irradiation time must equal the half-life of the produced indicator radionuclide to achieve half saturation.
Saturation activity. During irradiation the product is made at the constant rate and decays with : . With , the integrating-factor solution is (12), and multiplying by gives the stated . As , and production exactly balances decay:
Half-saturation. Put : , so , , and . ∎
This exact two-parter was repeated in 2022 as parts (a) and (b) — the single most-asked derivation in the chapter.
Q. (a) Deduce the expression of the saturation activity in neutron activation analysis considering the produced activity . (b) Prove that the irradiation time will be equal to the half-life of the produced indicator radionuclide to achieve the half saturation.
Identical to the 2021 question above — see its solution. Working from : (a) ; (b) half-saturation gives , i.e. . When the same derivation is asked three years running, it is not a suggestion — it is a syllabus.
Q. (c) Considering the ²⁰⁹Bi(n,γ)²¹⁰Bi ( b) → ²¹⁰Bi —β⁻ ( d)→ ²¹⁰Po reactions: calculate the disintegration rate of ²¹⁰Bi obtainable by leaving 1.0 g of ²⁰⁹Bi (100% abundant) in a neutron flux 1.0 × 10¹² n·cm⁻²·s⁻¹ for 3.0 h.
Note: the printed scheme mislabels the (n,γ) product as ²⁰⁹Bi; it is ²¹⁰Bi, and the question itself asks for the ²¹⁰Bi disintegration rate — solved accordingly.
Answer: 9.90 × 10⁶ disintegrations s⁻¹ (≈ 0.27 μCi). The 3 h irradiation is far short of the 5-day half-life, so only ~1.7% of the saturation activity (5.76 × 10⁸ Bq) is reached — for you may use directly.
Q. (a) Determine the time for the maximum activity of the daughter in the decay ⁹⁹Mo —66 h→ ⁹⁹ᵐTc —6 h→ ⁹⁹Tc. Hence find the activity of the daughter (⁹⁹ᵐTc) at that time, if the initial parent activity (⁹⁹Mo) was 4.0 mCi.
Repeat of the 2020 (MCHEM-0102) question: h, and mCi. Answer: 22.8 h; 3.15 mCi.
Q. (b) "CPAA and NAA are complementary to each other" — defend the statement with reason.
NAA (neutron activation) is superb for medium and heavy elements but blind to several light elements: H, He, Li, Be have tiny thermal-neutron capture cross sections, and C, N, O give products (e.g. short-lived β⁺ emitters) that are hard to count by γ-spectrometry. CPAA (charged-particle activation) uses protons, deuterons or α-particles, whose Coulomb-barrier reactions — e.g. ¹²C(d,n)¹³N, ¹⁶O(p,α)¹³N, ¹⁴N(p,α)¹¹C — determine exactly those light elements with high sensitivity.
Second, the probes sample different depths: neutrons penetrate the bulk, while charged particles stop within micrometres, so CPAA is surface-sensitive and NAA is a bulk technique. Between them they cover the whole periodic table and the whole sample. Hence complementary.
Q. (a) Write down the basic principle of neutron activation analysis.
The sample is irradiated with neutrons; (n,γ) capture converts part of each element into a radioactive isotope whose activity is proportional to the mass of that element. Measuring the characteristic radiation of the product — compared against a standard irradiated simultaneously (comparator method) — gives the elemental concentration, non-destructively and down to ppm–ppb levels. (Fuller statement in §2.5.)
Q. (b) Write the full form of (i) RNAA, (ii) FNAA and (iii) CPAA.
(i) RNAA — Radiochemical Neutron Activation Analysis (chemical separation after irradiation, before counting). (ii) FNAA — Fast Neutron Activation Analysis (fast, e.g. 14 MeV, neutrons instead of thermal). (iii) CPAA — Charged Particle Activation Analysis (protons/deuterons/α-particles instead of neutrons).
Q. (a) Differentiate between transient equilibrium and secular equilibrium.
| Secular | Transient | |
|---|---|---|
| Condition | ||
| Ratio | 1 (equal activities) | |
| Parent decay | negligible over the experiment | appreciable; both decay with |
| Example | ²³⁸U → ²³⁴Th | ⁹⁹Mo → ⁹⁹ᵐTc |
In short: secular is the limiting case of transient as , where the fixed ratio collapses to 1.
Q. (b) Consider the radioactive decay as a transient equilibrium. If the activity of A at time equals the activity of B at time after equilibrium is reached, show that as .
Same proof as the 2020 question with , : from the equilibrium Bateman form, , so as . ∎
Q. (c) Consider the decay scheme . Derive an expression for the activity of C at any time , if at the activity of A is and the activities of B and C are zero.
From D6: and . For C, ; multiply by the integrating factor :
With , , giving
Multiplying by and writing :
Sanity check: at the bracket is , so as required. This is the boxed result (11) of §3.
7 Exam Q&A
Q1. State the condition for secular equilibrium and the resulting activity relation.
(parent half-life enormously longer than the daughter's). Then : daughter activity equals parent activity.
Q2. In transient equilibrium, is the daughter activity greater or smaller than the parent's? Give the ratio.
Greater: . For ⁹⁹Mo/⁹⁹ᵐTc it is 1.10.
Q3. Write the Bateman activity equation for a two-member chain with .
.
Q4. A generator is eluted at . When should it next be eluted for maximum daughter activity?
At . For ⁹⁹Mo/⁹⁹ᵐTc this is ≈ 22.8 h — roughly daily milking.
Q5. Define saturation activity and state when it is reached.
— the activity at which production balances decay. Strictly reached only at infinite irradiation; 99% is reached after ≈ 6.64 product half-lives.
Q6. Why is the comparator method preferred in NAA?
A standard irradiated simultaneously with the sample cancels , , and the irradiation history — no absolute flux or cross-section values are needed, only the activity ratio with decay corrections.
Q7. Give one example each of secular, transient and no equilibrium from real decay chains.
Secular: ²³⁸U → ²³⁴Th. Transient: ⁹⁹Mo → ⁹⁹ᵐTc. No equilibrium: ²¹⁰Bi → ²¹⁰Po.
Q8. After equilibrium is reached, what half-life does the daughter appear to decay with?
The parent's: both activities vary as . Plotting vs gives a line of slope — this is how the ⁹⁹ᵐTc eluted from a generator is seen to decay with the 66 h half-life of its ⁹⁹Mo parent.
8 Quick revision
Symbol table
| Symbol | Meaning | Unit |
|---|---|---|
| decay constants of parent, daughter | s⁻¹ | |
| numbers of parent / daughter atoms | — | |
| activities | Bq (s⁻¹) | |
| target atoms in activation | — | |
| neutron flux | n·cm⁻²·s⁻¹ | |
| reaction cross section | cm² (barn = 10⁻²⁴ cm²) | |
| saturation activity | Bq | |
| time of maximum daughter activity | s |
Daughter activity always chases the parent's: it equals it (secular), exceeds it by a fixed ratio (transient), or peaks and is left behind (no equilibrium) — and the same production-vs-decay balance sets the saturation activity that makes activation analysis work.